Solar panel installation and maintenance

Solar panel installation and maintenance

1, Do not install the solar panels and solar photovoltaic modules in trees, buildings and other shading. Do not get near flames, or near flammable objects. To install the components in a reliable way, if the components are dropped from a height, they can cause damage or interfere with the safety of the property. Components can not be disassembled, bent or hit with hard objects components, to avoid stampede and other components of the action.

2, solar panels have a pair of waterproof plug, the series electrical connection, the former component of the "+" plug to connect the next component "-" pole plug, the output circuit to the right connection to the device, not Short positive and negative. Make sure there is no gap between the connector and the insulation connector.

3, to use spring washers and shim pads will be fixed solar photovoltaic components on the bracket. The panel assembly is grounded in an appropriate manner, depending on the site environment and the state of the mounting bracket structure.

4, often with a soft cloth to wipe the surface of solar panels. If you really want to replace (generally not required within 20 years) components, you must choose the same type of the same type. Do not touch the active part of the cable or connector with your hand, and use proper safety equipment if it is needed. (Insulation tools or gloves, etc.)

5, often check the lifting structure is loose, if necessary, re-tighten the parts. Check the connection of each wire, ground wire and plug.

6, in the maintenance of solar panels, please use opaque objects or materials to cover the front surface of the components, because the components in the sunlight will produce high pressure, it is dangerous. Quality Assurance Quality AssurancePV components are warranted for 20 years. The power attenuation does not exceed 10% in 10 years and the power attenuation does not exceed 20% in 20 years. General components of the actual service life of more than 25 years.

Shenzhen Di Sheng Energy Technology Co., Ltd. was founded in 2009, is China's most professional small solar module manufacturers and solutions provider, the company mastered a variety of solar cell packaging and core research and development technology and small solar modules MPPT charging circuit and micro Light charging circuit. Continuous innovation and optimization, Di Sheng company's products have a unique core competencies.

Di Sheng Energy has always been adhering to the service concept of "innovating technology, serving customers and creating prices for customers' products". From the design requirements of customers, DiSheng Energy reforms and innovates the packaging technology of solar cells, giving our customers new competitiveness in solar energy application products. Di Sheng solar panels widely used in solar cell phones, mobile power, wearable devices, Bluetooth headset speakers, GPS, electric vehicles, outdoor lighting and other outdoor use of electronic products. In the company of all staff efforts, Di Sheng with exquisite appearance and superior electrical performance, met with ZTE, Mobile, Topband, Germany SINVALLEY companies such as the establishment of a good relationship of cooperation.

After the long-term efforts of all staff, Di Sheng Energy has passed the ISO9001 international quality system certification, Di Sheng always follow the efficient management and strict production standards and thus produce first-class quality solar panels, widely favored customers. Changing information rapidly changing products, the same is our service concept for customers. Looking ahead, Di Sheng will be more positive to meet the challenges of the market, to provide customers with competitive solar panels and solutions. Let solar products really into the tens of thousands of households, for the Earth's low-carbon environmental protection to make its own contribution.

Sunshine and electricity counterparts, Di Sheng accompanied with you.